Baccarat tables are often described as big, midi, mini or squeeze tables. These labels are useful, but they do not all describe the same aspect of the game.
Big, midi and mini baccarat generally identify different table layouts or operating formats. Squeeze baccarat, by contrast, describes how face-down cards may be revealed. Commission baccarat, no-commission baccarat and Super Six refer to settlement or wagering rules rather than the physical size of the table.
Official gaming rules illustrate this distinction clearly. Singapore’s Gambling Regulatory Authority lists separate approved layouts for Mini Baccarat and Big Baccarat, while its rules treat card squeezing as a procedure that may be permitted on specific face-down games. Tasmania’s approved baccarat rules similarly include separate layout diagrams for Mini Baccarat and Midi Baccarat.
Understanding these differences is important when selecting a casino baccarat table. A table must support the approved game rules, number of betting positions, card-handling procedure and dealer workflow—not merely match a familiar shape.
In commission baccarat, players may wager on the Player hand, Banker hand or Tie. An ace counts as one point, picture cards count as zero, and numbered cards retain their face value. When a hand totals more than nine, only the final digit is used. A total of 15, for example, becomes a point total of five.
The Player and Banker hands begin with two cards. Whether either hand receives a third card is determined by the baccarat table of play. A natural eight or nine ends the drawing process, while lower totals are handled according to the prescribed third-card rules. These drawing decisions are not changed simply because the game is played on a larger or smaller table.
Fallsview Casino Resort’s published guide states directly that Mini Baccarat and Midi Baccarat use the same drawing rules as traditional baccarat. The differences therefore lie mainly in table layout, seating and card-handling procedure rather than in the method used to calculate the winning hand.
Terms such as “mini” and “big” should not be treated as fixed international measurements.
One approved Singapore commission baccarat rule set includes:
Mini Baccarat with seven player positions
Big Baccarat with twelve player positions
Bean Baccarat layouts with seven or nine player positions
A separate Singapore rule set for non-commission baccarat with Super Six includes Mini Baccarat layouts with five, six and seven player positions.
Tasmania’s 2025 baccarat rules state that approved tables may contain six, seven or nine numbered places and provide separate diagrams for Mini Baccarat and Midi Baccarat.
These official examples demonstrate that a name alone does not determine an exact table dimension or seat count. The operator must confirm the required layout under its own approved rules before the table is manufactured.
Big Baccarat generally refers to a larger table configuration with more individual betting positions.
Singapore’s approved commission baccarat documentation includes a Big Baccarat layout for twelve players. The same document separately identifies a seven-player Mini Baccarat layout, showing that “big” and “mini” are used there to distinguish approved table configurations rather than different hand-scoring systems.
A larger layout may be appropriate when the operating plan requires:
More numbered betting boxes
More space between player positions
A wider dealer work area
Additional pair or side-wager markings
Space for a card shoe, chip tray and other table equipment
The exact arrangement still depends on the selected game. A large table used for commission baccarat may require different printed information from one used for no-commission baccarat.
Operators should therefore define the game rules first and the physical table second. The shape and number of positions must follow the intended layout rather than being copied from another property.
CTSOK’s casino gaming table range includes baccarat table configurations that can be specified according to the intended layout, branding and equipment requirements. CTSOK’s current product information also states that size and tabletop layout can be customized for different projects.
Midi Baccarat is recognized as a separate table format in some approved rules, but it does not have one universal specification.
Tasmania’s baccarat rules provide different diagrams for Mini Baccarat and Midi Baccarat. The Mini layout shown in the rules contains seven numbered positions arranged around a compact curved betting area, while the Midi diagram uses a wider arrangement with nine numbered betting positions.
That example establishes a clear difference between Mini and Midi Baccarat within that particular regulatory framework. It does not mean every casino must use the same seating arrangement.
Fallsview Casino Resort also distinguishes Midi Baccarat from Mini Baccarat while confirming that both retain the traditional baccarat drawing rules.
For equipment procurement, the practical conclusion is that “midi” should be treated as a project description rather than a complete technical specification. Before placing an order, the operator should confirm:
Number of numbered player positions
Location of the Player, Banker and Tie areas
Pair or side-bet sections
Whether cards are dealt face up or face down
Whether players may touch or reveal the cards
Position of the shoe, discard holder and chip tray
Overall dimensions and installation space
Without these details, two tables described as Midi Baccarat could still have materially different layouts.
Mini Baccarat is a recognized compact table format, but official rules show that its capacity can vary.
Singapore’s approved baccarat documents include five-, six- and seven-player Mini Baccarat layouts, depending on the version of the game being offered. Tasmania’s example uses seven numbered positions.
This means Mini Baccarat should not be defined by one fixed number of seats.
What remains consistent is that the underlying baccarat scoring and third-card rules can remain the same as those used in the traditional game. Fallsview’s guide explicitly confirms this for both Mini and Midi Baccarat.
The term “mini” is therefore most useful when describing a compact layout rather than a different version of card valuation.
A Mini Baccarat table still needs clearly identified areas for the permitted wagers. Depending on the approved game, these may include:
Player
Banker
Tie
Player Pair
Banker Pair
Other approved side wagers
The layout must correspond to the actual rules offered at the table. For example, Singapore’s approved non-commission baccarat with Super Six layouts include a separately marked Super Six betting area in addition to the standard baccarat wagers.
CTSOK’s current Mini Baccarat Table is presented as a compact, single-dealer configuration. Its product page lists customizable dimensions, table-felt graphics and optional equipment integration. These are characteristics of that CTSOK configuration, not universal requirements for every Mini Baccarat table.
Squeeze Baccarat is different from Big, Midi and Mini Baccarat because “squeeze” describes a card-reveal procedure rather than a fixed table capacity.
The Gambling Regulatory Authority of Singapore defines squeezing as a process in which face-down cards are bent, folded or otherwise turned gradually to reveal their value.
Singapore’s commission baccarat rules state that, on specific tables where cards are dealt face down, the seated player with the highest wager may request permission to squeeze a card. This confirms that squeezing is a permitted procedure attached to certain tables, not a separate method of calculating the Player and Banker hands.
Whether players are allowed to touch cards depends on the rules used by the operator. Fallsview’s guide notes that players may not have the option to touch the cards in every baccarat format.
Card-handling requirements can also differ between jurisdictions. Tasmania’s approved rules state that when cards have been handled by a player during a shoe, all cards from that shoe must be replaced. This is a specific Tasmanian requirement and should not be presented as a universal rule, but it illustrates why an operator must consider card replacement procedures when planning squeeze play.
Before specifying a squeeze table, the operator should confirm:
Whether player card handling is permitted
Which player may receive or reveal the cards
Whether the cards are delivered face down
How used or handled cards are collected
When cards must be replaced
How much open space is required for card presentation
Where the shoe and discard holder will be positioned
CTSOK’s Squeeze Baccarat Table is designed with a dedicated card-reveal area and supports customized table dimensions, graphics and equipment configurations. These product-specific features should be matched with the operator’s approved squeeze procedure.
The four terms can be summarized as follows:
| Baccarat term | What the term mainly describes | Example from published rules |
|---|---|---|
| Big Baccarat | A larger approved table layout | Singapore rules show a 12-player Big Baccarat layout |
| Midi Baccarat | A separate medium-format layout used by some operators or regulators | Tasmania provides a distinct Midi Baccarat diagram |
| Mini Baccarat | A compact table layout | Published rules show Mini layouts with 5, 6 or 7 positions |
| Squeeze Baccarat | A gradual face-down card-reveal procedure | Singapore rules permit squeezing on specified tables |
The examples above are not universal manufacturing standards. They show how different authorities and operators define their own approved configurations.
Table size should not be confused with payout structure.
Under the Singapore commission baccarat rules reviewed for this article, a winning Banker wager pays 0.95 to 1 because the house collects a five-percent commission. Player wins pay 1 to 1, and Tie wins pay 8 to 1 under that approved rule set.
Under the reviewed non-commission baccarat with Super Six rules, a Banker win normally pays 1 to 1. When the Banker wins with six points, the Banker wager pays 1 to 2. The same rules also define Super Six as a separate side wager on the Banker winning with six.
These settlement rules can be offered on more than one table layout. The same Singapore non-commission document includes Bean Baccarat and Mini Baccarat configurations, demonstrating that a payout version and a physical format are separate decisions.
A No Commission Baccarat Table therefore needs appropriate payout and betting information on its layout, while a Super 6 Baccarat Table needs the designated Super Six betting area where that wager is offered. The final artwork must follow the rules approved for the operator’s jurisdiction rather than relying on a generic design.
Selecting a baccarat table should begin with the approved operating procedure.
Determine whether the game will use commission baccarat, no-commission baccarat, Super Six or another approved variation. This affects the wager markings and payout information printed on the table.
Do not assume that all Mini, Midi or Big Baccarat tables use the same capacity. Official examples show multiple approved seat counts.
The operator should specify whether cards are dealt face up or face down and whether the dealer or a player reveals them.
A squeeze procedure affects card handling and may trigger additional card-control or replacement requirements.
Player, Banker and Tie are the principal baccarat areas, but pair wagers, Super Six and other approved side bets require additional printed sections.
The final drawing should identify the intended location of the card shoe, discard holder, chip tray, drop box, display equipment and any electronic components.
A layout used in one jurisdiction cannot automatically be assumed to comply with another. The operator must compare the proposed artwork and operating procedure with the rules accepted by its own regulator.
Big, Midi, Mini and Squeeze Baccarat are related terms, but they are not interchangeable.
Big, Midi and Mini Baccarat principally distinguish table layouts and the number or arrangement of betting positions. Squeeze Baccarat describes a controlled way of revealing face-down cards. Commission, no-commission and Super Six identify settlement or wagering rules.
Official documents also show why buyers should avoid relying on a product name alone. Mini Baccarat can have different numbers of betting positions, Midi Baccarat is not defined identically everywhere, and squeeze procedures depend on the rules under which the table operates.
A suitable baccarat table is therefore one whose dimensions, betting layout, card-handling areas and equipment positions have been developed around the operator’s approved game—not simply one that carries the correct format name.
Interested in our products? Click the button below to book a demo or get more information
